Dues & Locker/Drawer FeesYour dues for 2022 must be paid in full before January 1, 2022 or you will not be able to get into the shop. The fastest and […]
Month: December 2021
SawStop Saw Blade Wobble
Lats week, a wobble was discovered in the blade of the new SawStop saw. Gary Riecke measured the deviance in the blade at about 20 thousandths of an inch. This […]
Maintenance Update
While the maintenance team will continue their work, maintenance updates published here will resume the week of January 10, 2021.
Pay Dues for 2021 AND 2022
Pay Dues for 2021 AND 2022 If you did not pay dues for the current year (2021), this is a reminder to pay them before December 31. You cannot skip […]
Shop Closure-Dec 28-29-30
GVR will be installing anti slip flooring in front of the lathes, jointer and planer. This is a three day process. The shop will reopen on December 31, but GVR […]
Giving Back
Please consider taking monitor training and working shifts as a monitor. The shop cannot run without monitors and will, in fact, close if there is no one willing to monitor. […]
Election Results
Congrats and thanks to those who ran for Board positions for 2022 onwards. Newly elected were Jim Huprich, Bruce France and Dick Sutherland. Stewart Tagg PresidentBruce France VPSecretary John JacksonTreasurer […]
Sharpening Wheels
It seems that some members are not using the correct wheels. Green is for carbide sharpening, white or grey is for HSS. The green wheel should NEVER be used for […]
Maintenance Update
Lathe # 5 The #5 lathe continues to be a bit of a mystery and is still out of service. There are few options for dealing with this tool – […]