We have ordered a new pin nailer. There are times that the nailer currently in the shop is hard to get ahold of as it is used quite a bit, […]
Author: Dave Bourque
Under Utilized Equipment
Space is at a premium in the shop. In order to make more room, Maintenance is considering moving some of the less used equipment. Have a look beside a tool […]
Lathe Threading Jig
This remarkably well made and designed jig is available for member use. An effort will me made to put it in an accessible area, likely a sign out from the […]
Nova Drill Press Depth Stop Can Slip
A note on the depth stops for the new drill presses: There is a quick release button on the vertical threaded rod. If the button on the set is not […]
Laguna Bandsaw Brake
The brake on the Laguna bandsaw (the saw beside the lathes) has been damaged by someone forcing the brake. A 3/8″ bolt was sheared. This brake does not stop the […]
Tool Damage From Abuse
Two of the new drill presses have damaged depth gauges that need to be repaired or replaced. This damage was caused by forcing the chuck lower than the stop. A […]
Drill Guides for Hand Drills
Drilling a hole at an accurate 90 (or 45) degrees to work with a hand drill is all but impossible. A new attachment for the hand drills solves this. The […]
Wet Glue On Machines an Ongoing Problem
Work with wet glue must never be used on any machine. Wet glue ruins sandpaper and the paper must be replaced. Please allow the glue to dry for 24 hours […]
TV Monitor in Coffee Room
A 50″ monitor was mounted above the desk. This will show things such as monitor schedules, announcements, shop updates, training videos, new equipment videos etc. It should be operational shortly.
Maintenance Update
• discussion of quantity/use of consumables such as sandpaper• segmented bowl jig reported to be working well• CC camera near coffee room cleaned and restarted
Small Biscuit Joiner
The small Bosch biscuit joiner uses special biscuits. These are available for sale at the monitor station for $0.05 each. Note that the biscuits used for the larger joiner will […]
Air Hose fitting
The fitting for the air hose in the east (old) patio is being replaced. The hose will be back when the fitting is repaired.
Lathe chuck found
A lathe chuck was turned in. Speak to a Maintenance Team member to claim your lost tool.
Shop Security Cameras
To observe members who do not clean up, misuse equipment or practice unsafe use of equipment, shop security video is being used more regularly. 99% of the shop is visible […]
Maintenance Update
Routine checks of chop saws, radial arm saw, jointer, band saws. These machines are in good shape thanks to the proper use by members. We are finding that machines are […]